|
Post by Slacker on Mar 3, 2008 17:33:36 GMT -8
I have been looking .. and looking .. but I cant find any .
anyone know of a 3.0L V6 in to a First gen ?
|
|
|
Post by msrwerks on Mar 4, 2008 5:03:24 GMT -8
|
|
|
Post by Slacker on Mar 4, 2008 7:44:55 GMT -8
Thanks Michael ... I seen many of the 3.0L in the first gen 4Runners .. what I was really looking for is in to the first gen truck or Trekker ..
|
|
|
Post by Slacker on Mar 4, 2008 7:46:02 GMT -8
Robb yeah , I can not find anything .. I was just hopin' some one did the 3.0 as it's "basically " the same as the 3.4 .
|
|
|
Post by Okiyota on Mar 4, 2008 8:36:19 GMT -8
No one that i know of has done it, the 3.0 is not a very popular engine due to its head gasket issues, lack of power (the 3rz 2.7L puts out the same HP and weighs substantially less) and the fact that the 3.4 is almost as direct of a swap as a 3.0 in any Toyota. I dont know if this is something you are considering, or just wondering about, but I would have to urge against it, there are too many other engines that are better choices.
|
|
|
Post by Slacker on Mar 4, 2008 17:03:54 GMT -8
no .. no .. 3.4L is a GO ... and soon supercharged as well I was just asking about the 3.0 , because it is "basically" the same as the 3.4 , and I know no one has done the 3.4 before , but I thought maybe a long time ago ??, maybe some one had done the 3.0 .. just looking for info . as it turns out , I have found someone who has done this swap .. I asked him for some pics , so hopefully I will get some .
|
|
|
Post by Okiyota on Mar 4, 2008 20:47:28 GMT -8
Right on!! Good choice with the 3.4 by the way, i would have loved to do that same swap in mine, but the 22RE was already in my possesion. Plus i will have my hands full enough with the 2JZGTTE that is going in my 94 2wd Prerunner!! Cant wait for that one to be finished!
|
|
|
Post by Slacker on Mar 5, 2008 7:24:33 GMT -8
That will be cool .. you have to post it up on my 2WD board .. toyota2wd.proboards2.com/index.cgi .. I have a 400HP 7Mgte going into my little 2WD , it's not a pre runner though.
|
|
|
Post by Okiyota on Mar 5, 2008 8:13:21 GMT -8
Cool, once i start on it I'll join the other board and make a thread on there too.
My 2JZ is a JDM engine with 16,000 miles. I'm planning on running a Stand Alone Fuel Management System on it and hoping to be around the 600hp range on pump gas, but again, its going to be a race truck for desert racing.
|
|