|
Post by Slacker on Mar 26, 2015 15:50:19 GMT -8
|
|
|
Post by Slacker on Mar 27, 2015 17:07:52 GMT -8
got the rest of the interior out , and removed the rear hatch also removed the drivers flare , and as suspected , it's the same as the passenger side also , got the rear 1/4r windows removed ugly job , I wear rubber gloves with cloth gloves over top , soaked in wd40 ..
|
|
|
Post by Slacker on Mar 30, 2015 15:26:05 GMT -8
and time to take the 1/4rs off . first is to cut the pillars , then drill all the rest of the spot welds . looks like I have some more rust to deal with
|
|
|
Post by Slacker on Mar 31, 2015 17:04:10 GMT -8
time for some test fitting take your time .. this will take some time .. I'm about 3 hours total fitting and removing , a little trim here and there , off and on about 10 times , but you want to do this to fit them correctly and now I'm happy with the fit ... time to fit the window and happy with this ... I can now move on the the rust repair
|
|
pacer
New Member
Posts: 5
|
Post by pacer on Mar 31, 2015 18:01:20 GMT -8
Subscribed, very nice work!
|
|
|
Post by Slacker on Mar 31, 2015 18:11:35 GMT -8
thanks ..
|
|
|
Post by Slacker on Apr 1, 2015 17:11:56 GMT -8
ok so now we have a great fit .. time to fix the rust first I took a couple of measurements of the piece I would need to cut out . then got my sheet metal , drew the lines , and cut it out .. jig saw works great for these small pieces . Then with the mini bender , you can put an edge on it .. a piece of 2X4 it counter edge will work as well and although no one will ever see it , I used my bead roller to put the factory type "dimples" in the metal and now , I can take these pieces , and use them as my template for cutting the rust out and now tacked in place I can now prep for the POR15 treatment POR15 done .. to cure overnight also .. got the "glue tabs " done to cure overnight as well .
|
|
|
Post by Slacker on Apr 6, 2015 17:56:18 GMT -8
so with the long weekend over , and everything cured , time to make the sides permanent . We use in our shop , and recommend 3M panel bonder #08115 . not cheep , but in my opinion , it is the best + it is the only product that offers a lifetime warrantee be very liberal with it .. I use a popsicle stick to spread it out , and make sure I cover all bare metal installed and clamped
|
|
|
Post by Slacker on Apr 7, 2015 17:32:14 GMT -8
and off to paint
|
|
|
Post by Slacker on Apr 20, 2015 17:31:22 GMT -8
|
|
|
Post by 83trekker on Apr 20, 2015 18:45:25 GMT -8
wow that's just looks amazing.
|
|
|
Post by Slacker on Apr 20, 2015 19:02:27 GMT -8
thanks brutha )
|
|